BSOD aléatoire sur hal.dll et ntoskrnl.exe

[darkvadd7]

Bonjour,

 

Depuis quelques temps maintenant, j'obtient des BSOD de façon aléatoire. La plupart du temps il s'agit d'une erreur 0x124 sur hal.dll et ntoskrnl.exe. J'ai déjà formaté et testé mes barrettes de RAM, tous mes pilotes sont à jour ainsi que le bios de la carte mère.

 

Je ne sais plus vraiment ou chercher. Voici ma config :

 

Configuration de  darkvadd7

 

et voici une trace WhoCrashed : 

 

Crash dump directory: C:\Windows\Minidump 

 

Crash dumps are enabled on your computer. 

 

On Sat 21/09/2013 06:56:05 GMT your computer crashed 

crash dump file: C:\Windows\Minidump\092113-18376-01.dmp 

This was probably caused by the following module: ntoskrnl.exe (nt+0x75B80)  

Bugcheck code: 0x1E (0xFFFFFFFF80000004, 0xFFFFF80002ADAC45, 0xFFFFFA8006F62A00, 0xFFFFFA8006F62A00) 

Error: KMODE_EXCEPTION_NOT_HANDLED 

file path: C:\Windows\system32\ntoskrnl.exe 

product: Microsoft® Windows® Operating System 

company: Microsoft Corporation 

description: NT Kernel & System 

Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch. 

This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.  

The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.  

 

On Sat 21/09/2013 06:56:05 GMT your computer crashed 

crash dump file: C:\Windows\memory.dmp 

This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)  

Bugcheck code: 0x1E (0xFFFFFFFF80000004, 0xFFFFF80002ADAC45, 0xFFFFFA8006F62A00, 0xFFFFFA8006F62A00) 

Error: KMODE_EXCEPTION_NOT_HANDLED 

Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch. 

This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.  

The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.  

 

On Sat 21/09/2013 06:53:50 GMT your computer crashed 

crash dump file: C:\Windows\Minidump\092113-19390-01.dmp 

This was probably caused by the following module: hal.dll (hal+0x12A3B)  

Bugcheck code: 0x124 (0x0, 0xFFFFFA8005115028, 0xB2000000, 0x10005) 

Error: WHEA_UNCORRECTABLE_ERROR 

file path: C:\Windows\system32\hal.dll 

product: Microsoft® Windows® Operating System 

company: Microsoft Corporation 

description: Hardware Abstraction Layer DLL 

Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).  

This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.  

The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.  

 

Si vous avez besoin d'autre chose, n'hésitez pas.

 

Merci.

 

 

[GPC29200]

Hello

 

As tu jeté un oeil sur ce post :

 

http://support.microsoft.com/kb/275678/fr