Jump to content

BSOD cause ntoskrnl.exe et ksecdd.sys


cyrille62
 Share

Recommended Posts

Bonjour quand je veux uploader une photo ou un fichier, j'ai un BSOD. J'ai utilisé whocrashed et j'obtiens ceci :

On Wed 15/08/2012 13:29:08 GMT your computer crashed

crash dump file: C:\Windows\Minidump\081512-34585-01.dmp

This was probably caused by the following module: ntoskrnl.exe (nt+0x7F1C0)

Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88003968D80, 0x0, 0x0)

Error: KMODE_EXCEPTION_NOT_HANDLED

file path: C:\Windows\system32\ntoskrnl.exe

product: Microsoft® Windows® Operating System

company: Microsoft Corporation

description: NT Kernel & System

Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.

This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.

The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

On Wed 15/08/2012 13:29:08 GMT your computer crashed

crash dump file: C:\Windows\memory.dmp

This was probably caused by the following module: ksecdd.sys (ksecdd+0x26B3)

Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88003968D80, 0x0, 0x0)

Error: KMODE_EXCEPTION_NOT_HANDLED

file path: C:\Windows\system32\drivers\ksecdd.sys

product: Microsoft® Windows® Operating System

company: Microsoft Corporation

description: Kernel Security Support Provider Interface

Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.

This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.

The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.

Comment résoudre ça? please help me

Link to comment
Share on other sites

le début du topic est un rapport généré par un soft autre que Ma-config.com

moi, je suis un peu neuneu, donc si on me change une interface je ne comprends plus rien :Forum25:

quand tu es sur la page de ta configuration après la détection, tu cliques sur "Partager" puis tu double clic sur "lien direct" pour le copier et tu le colles tel quel dans ton message

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...