Jump to content
Sign in to follow this  
patrickng9

IRQL_not_less_or_equal

Recommended Posts

Bonjour, j'ai eu un problem de BSoD et la cause est ntoskrnl.exe

Voici le message (prise avec BlueScreenView de Nirsoft)

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

Technical Information:

*** STOP: 0x1000000a (0x9a2aaec8, 0x00000002, 0x00000000, 0x804e7865)

*** ntoskrnl.exe - Address 0x804e7865 base at 0x804d7000 DateStamp 0x4bd6e0e8

Comment dois-je faire pour regler cette probleme?

Share this post


Link to post
Share on other sites

Jai eu un autre BSoD... Bad_pool_caller

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

BAD_POOL_CALLER

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

Technical Information:

*** STOP: 0x000000c2 (0x00000040, 0x10000000, 0x80000000, 0x00000000)

*** ntoskrnl.exe - Address 0x804f9f43 base at 0x804d7000 DateStamp 0x4bd6e0e8

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...