Aller au contenu
patrickng9

IRQL_not_less_or_equal

Publications recommandées

Bonjour, j'ai eu un problem de BSoD et la cause est ntoskrnl.exe

Voici le message (prise avec BlueScreenView de Nirsoft)

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

Technical Information:

*** STOP: 0x1000000a (0x9a2aaec8, 0x00000002, 0x00000000, 0x804e7865)

*** ntoskrnl.exe - Address 0x804e7865 base at 0x804d7000 DateStamp 0x4bd6e0e8

Comment dois-je faire pour regler cette probleme?

Partager cette publication


Lien à poster
Partager sur d’autres sites

Jai eu un autre BSoD... Bad_pool_caller

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

BAD_POOL_CALLER

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

Technical Information:

*** STOP: 0x000000c2 (0x00000040, 0x10000000, 0x80000000, 0x00000000)

*** ntoskrnl.exe - Address 0x804f9f43 base at 0x804d7000 DateStamp 0x4bd6e0e8

Partager cette publication


Lien à poster
Partager sur d’autres sites

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Se connecter dès maintenant

×