Problème avec mon lecteur graveur Optiarc dvd rw ad-7200s scsi cdrom device

[Matthias]

Bonjour, je poste ce sujet car je n'arrive pas a graver quoi que ce soit alors que je viens juste d'acheter mon pc...

ce qui est aussi un problème pour faire mes masters cd.

des précisions, je ne sais pas si ca peux vous aider mon lecteur est le premier a booter quand je démarre mon pc, il n'arrive pas a booter avec un cd dedans, mais je ne préfère pas trop toucher au bios..

voici ma config: http://www.ma-config.com/AfficherResume-84864-0.html

voici le journal contenant l'erreur de gravure (néro) :

Windows Vista 6.0

IA32

WinAspi: -

NT-SPTI used

Nero Version: 9.4.13.100

Internal Version: 9, 4, 13, 100

Recorder: <Optiarc DVD RW AD-7200S> Version: 1.52 - HA 1 TA 0 - 9.4.13.100

Adapter driver: <Serial ATA> HA 1

Drive buffer : 2048kB

Bus Type : via Inquiry data

CD-ROM: <Optiarc DVD RW AD-7200S >Version: 1.52 - HA 1 TA 0 - 9.4.13.100

Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===

DiskPeripheral : NVIDIA STRIPE 596.18G nvrd32 Port 0 ID 1 DMA: Off

: NVIDIA nvstor32 Port 3 ID 0 DMA: Off

: NVIDIA nvstor32 Port 3 ID 1 DMA: Off

: Optiarc DVD RW AD-7200S 1.52 nvstor32 Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===

Optiarc DVD RW AD-7200S D: CdRom0

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 2047MB (2097151kB)

Free physical memory: 2047MB (2097151kB)

Memory in use : 32 %

Uncached PFiles: 0x0

Global Bus Type: default (0)

Check supported media : Disabled (0)

19.7.2009

CD-ROM (ISO)

18:49:12 #1 Text 0 File SCSIPTICommands.cpp, Line 430

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

18:49:12 #2 Text 0 File Isodoc.cpp, Line 6998

Iso document burn settings

------------------------------------------

Determine maximum speed : TRUE

Simulate : FALSE

Write : TRUE

Finalize CD : TRUE

Multisession : FALSE

Burning mode : TAO

Mode : 1

ISO Level : 1 (Max. of 11 = 8 + 3 char)

Character set : ISO 9660

Joliet : TRUE

Allow pathdepth more than 8 directories : TRUE

Allow more than 255 characters in path : TRUE

Write ISO9660 ;1 file extensions : TRUE

18:49:12 #3 Text 0 File Burncd.cpp, Line 3242

Optiarc DVD RW AD-7200S

Protection contre les ruptures activés

18:49:12 #4 ISO9660GEN -11 File Geniso.cpp, Line 3327

First writeable address = 0 (0x00000000)

18:49:12 #5 Text 0 File ThreadedTransferInterface.cpp, Line 1012

Removed 2 run-out blocks from end of track 0. Length: 202576 -> 202574.

18:49:12 #6 Text 0 File Burncd.cpp, Line 3572

Turn on Track-At-Once, using CD-R/RW media

18:49:12 #7 Text 0 File ThreadedTransferInterface.cpp, Line 1012

Removed 2 run-out blocks from end of track 1. Length: 202576 -> 202574.

18:49:12 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1012

Removed 2 run-out blocks from end of track 1. Length: 202576 -> 202574.

18:49:12 #9 Text 0 File DlgWaitCD.cpp, Line 294

Medium type in the drive: Unknown

Lowest/Highest CLV write speed: 3x/1219640x

Recorder min/max supported write speed: 4x/9271468x

18:49:12 #10 Text 0 File DlgWaitCD.cpp, Line 313

Last possible write address on media: 359846

Last address to be written: 202575

18:49:12 #11 Text 0 File DlgWaitCD.cpp, Line 325

Write in overburning mode: NO (enabled: CD)

18:49:12 #12 Text 0 File DlgWaitCD.cpp, Line 2843

Recorder: Optiarc DVD RW AD-7200S;

CDRW code: 00 97 17 01; OSJ entry from: Moser Baer India Limited

ATIP Data:

Special Info [hex] 1: E3 00 CF, 2: 61 11 01 (LI 97:17.01), 3: 4F 3B 4A (LO 79:59.74)

Additional Info [hex] 1: 24 2C AC, 2: 6C A4 34, 3: 04 D1 80

18:49:12 #13 Text 0 File DlgWaitCD.cpp, Line 500

>>> Protocol of DlgWaitCD activities: <<<

=========================================

18:49:12 #14 Text 0 File ThreadedTransferInterface.cpp, Line 739

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 ()

2 indices, index0 (150) not provided

original disc pos #0 + 202576 (202576) = #202576/45:1.1

relocatable, disc pos for caching/writing not required/ required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 202574 blocks [D: Optiarc DVD RW AD-7200S]

--------------------------------------------------------------

18:49:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 941

Prepare [D: Optiarc DVD RW AD-7200S] for write in TAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1: Idx 0 Idx 1 Next Trk

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 415182848, ISRC ""

DAO layout:

===========

___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________

-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00

-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 1 | 0x41 | 202576 | 0 | 0x00

202576 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

18:49:12 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1012

Removed 2 run-out blocks from end of track 1. Length: 202576 -> 202574.

18:49:15 #17 Text 0 File SCSIPTICommands.cpp, Line 217

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

18:49:15 #18 Text 0 File Burncd.cpp, Line 4279

Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

18:49:15 #19 Phase 24 File dlgbrnst.cpp, Line 1767

Caching of files started

18:49:15 #20 Text 0 File Burncd.cpp, Line 4401

Cache writing successful.

18:49:15 #21 Phase 25 File dlgbrnst.cpp, Line 1767

Caching of files completed

18:49:15 #22 Phase 28 File dlgbrnst.cpp, Line 1767

Speed measurement started

18:49:15 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2695

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:49:15 #24 Text 0 File ThreadedTransfer.cpp, Line 273

Pipe memory size 590400

18:49:16 #25 Phase 29 File dlgbrnst.cpp, Line 1716

Speed measurement completed: 2308.5x (346 282 Ko/s)

18:49:16 #26 Phase 36 File dlgbrnst.cpp, Line 1767

Burn process started at 10x (1 500 Ko/s)

18:49:16 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2695

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:49:16 #28 Text 0 File MMC.cpp, Line 21714

Set BUFE: Buffer underrun protection -> ON

18:49:16 #29 Text 0 File ThreadedTransfer.cpp, Line 273

Pipe memory size 83836800

18:49:46 #30 SPTI -1106 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)

CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x03

Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03

Buffer x190b0040: Len x10000

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

18:49:46 #31 CDR -1106 File Writer.cpp, Line 306

Power calibration error

D: Optiarc DVD RW AD-7200S

18:49:46 #32 CDR -201 File WriterStatus.cpp, Line 325

Invalid write state

D: Optiarc DVD RW AD-7200S

18:49:46 #33 TRANSFER -18 File WriterStatus.cpp, Line 325

Could not perform EndTrack

18:49:46 #34 Text 0 File MMC.cpp, Line 17135

<Optiarc DVD RW AD-7200S > start Close Track #2

18:49:46 #35 SPTI -1176 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)

CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x72

Sense Qual: 0x04

Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04

18:49:46 #36 CDR -1176 File WriterStatus.cpp, Line 375

Session fixation error

D: Optiarc DVD RW AD-7200S

18:49:46 #37 TRANSFER -19 File WriterStatus.cpp, Line 375

Could not perform Fixation

18:49:46 #38 Text 0 File WriterStatus.cpp, Line 384

falling back to disc fixation

18:49:46 #39 Text 0 File DVDPlusDualLayer.cpp, Line 1452

SetDriveCaps: Set LAST LBA of layer 1 to 0

18:49:46 #40 Phase 38 File dlgbrnst.cpp, Line 1767

Burn process failed at 10x (1 500 Ko/s)

18:49:46 #41 Text 0 File SCSIPTICommands.cpp, Line 267

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:49:50 #42 Text 0 File Cdrdrv.cpp, Line 11478

DriveLocker: UnLockVolume completed

18:49:50 #43 Text 0 File SCSIPTICommands.cpp, Line 430

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

[ChtiGG]

Salut,

C'est très dérangeant pour un PC neuf

Tu peux essayer la manip de Pat pour supprimer et réinstaller le graveur au niveau logiciel.

[crazymonkey]

j'ai le même graveur que toi mais un bios moins recent

http://www.ma-config.com/AfficherResume-84547-0.html

Moi j'ai installer mon vista a partir du lecteur nickel

je fais les mise a jour sp2

et là mon graveur n'est plus reconnu, pas bien

mise a jour du chipset est nickel tous et reconnu est marche nickel

Donc regarde si ton chipset est a jour et essaie avec un autre utilitaire de gravure.

[Raymond 78]

Bonjour,

J'ai aussi rencontré ce problème après avoir changé le boitier sur un PC de six mois. J'ai recherché un logiciel de gravure après avoir essayé une dizaine j'ai opté pour Free Easy Burner qui est gratuit facile et en français.

Si cela peut aider