Matthias Posted July 19, 2009 Report Share Posted July 19, 2009 Bonjour, je poste ce sujet car je n'arrive pas a graver quoi que ce soit alors que je viens juste d'acheter mon pc...ce qui est aussi un problème pour faire mes masters cd.des précisions, je ne sais pas si ca peux vous aider mon lecteur est le premier a booter quand je démarre mon pc, il n'arrive pas a booter avec un cd dedans, mais je ne préfère pas trop toucher au bios.. voici ma config: http://www.ma-config.com/AfficherResume-84864-0.htmlvoici le journal contenant l'erreur de gravure (néro) : Windows Vista 6.0IA32WinAspi: -NT-SPTI usedNero Version: 9.4.13.100Internal Version: 9, 4, 13, 100Recorder: <Optiarc DVD RW AD-7200S> Version: 1.52 - HA 1 TA 0 - 9.4.13.100 Adapter driver: <Serial ATA> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry dataCD-ROM: <Optiarc DVD RW AD-7200S >Version: 1.52 - HA 1 TA 0 - 9.4.13.100 Adapter driver: <Serial ATA> HA 1=== Scsi-Device-Map ===DiskPeripheral : NVIDIA STRIPE 596.18G nvrd32 Port 0 ID 1 DMA: Off : NVIDIA nvstor32 Port 3 ID 0 DMA: Off : NVIDIA nvstor32 Port 3 ID 1 DMA: Off : Optiarc DVD RW AD-7200S 1.52 nvstor32 Port 4 ID 0 DMA: Off=== CDRom-Device-Map ===Optiarc DVD RW AD-7200S D: CdRom0=======================AutoRun : 1Excluded drive IDs: WriteBufferSize: 83886080 (0) ByteBUFE : 0Physical memory : 2047MB (2097151kB)Free physical memory: 2047MB (2097151kB)Memory in use : 32 %Uncached PFiles: 0x0Global Bus Type: default (0)Check supported media : Disabled (0) 19.7.2009CD-ROM (ISO)18:49:12 #1 Text 0 File SCSIPTICommands.cpp, Line 430 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL18:49:12 #2 Text 0 File Isodoc.cpp, Line 6998 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE18:49:12 #3 Text 0 File Burncd.cpp, Line 3242 Optiarc DVD RW AD-7200S Protection contre les ruptures activés18:49:12 #4 ISO9660GEN -11 File Geniso.cpp, Line 3327 First writeable address = 0 (0x00000000)18:49:12 #5 Text 0 File ThreadedTransferInterface.cpp, Line 1012 Removed 2 run-out blocks from end of track 0. Length: 202576 -> 202574.18:49:12 #6 Text 0 File Burncd.cpp, Line 3572 Turn on Track-At-Once, using CD-R/RW media18:49:12 #7 Text 0 File ThreadedTransferInterface.cpp, Line 1012 Removed 2 run-out blocks from end of track 1. Length: 202576 -> 202574.18:49:12 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1012 Removed 2 run-out blocks from end of track 1. Length: 202576 -> 202574.18:49:12 #9 Text 0 File DlgWaitCD.cpp, Line 294 Medium type in the drive: Unknown Lowest/Highest CLV write speed: 3x/1219640x Recorder min/max supported write speed: 4x/9271468x18:49:12 #10 Text 0 File DlgWaitCD.cpp, Line 313 Last possible write address on media: 359846 Last address to be written: 20257518:49:12 #11 Text 0 File DlgWaitCD.cpp, Line 325 Write in overburning mode: NO (enabled: CD)18:49:12 #12 Text 0 File DlgWaitCD.cpp, Line 2843 Recorder: Optiarc DVD RW AD-7200S; CDRW code: 00 97 17 01; OSJ entry from: Moser Baer India Limited ATIP Data: Special Info [hex] 1: E3 00 CF, 2: 61 11 01 (LI 97:17.01), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 24 2C AC, 2: 6C A4 34, 3: 04 D1 8018:49:12 #13 Text 0 File DlgWaitCD.cpp, Line 500 >>> Protocol of DlgWaitCD activities: <<< =========================================18:49:12 #14 Text 0 File ThreadedTransferInterface.cpp, Line 739 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 202576 (202576) = #202576/45:1.1 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 202574 blocks [D: Optiarc DVD RW AD-7200S] --------------------------------------------------------------18:49:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 941 Prepare [D: Optiarc DVD RW AD-7200S] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 415182848, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 202576 | 0 | 0x00 202576 | lead-out | 1 | 0x41 | 0 | 0 | 0x0018:49:12 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1012 Removed 2 run-out blocks from end of track 1. Length: 202576 -> 202574.18:49:15 #17 Text 0 File SCSIPTICommands.cpp, Line 217 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME18:49:15 #18 Text 0 File Burncd.cpp, Line 4279 Caching options: cache CDRom or Network-Yes, small files-No (<64KB)18:49:15 #19 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started18:49:15 #20 Text 0 File Burncd.cpp, Line 4401 Cache writing successful.18:49:15 #21 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed18:49:15 #22 Phase 28 File dlgbrnst.cpp, Line 1767 Speed measurement started18:49:15 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2695 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #018:49:15 #24 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 59040018:49:16 #25 Phase 29 File dlgbrnst.cpp, Line 1716 Speed measurement completed: 2308.5x (346 282 Ko/s)18:49:16 #26 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 10x (1 500 Ko/s)18:49:16 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2695 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #018:49:16 #28 Text 0 File MMC.cpp, Line 21714 Set BUFE: Buffer underrun protection -> ON 18:49:16 #29 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 8383680018:49:46 #30 SPTI -1106 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x190b0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18:49:46 #31 CDR -1106 File Writer.cpp, Line 306 Power calibration error D: Optiarc DVD RW AD-7200S18:49:46 #32 CDR -201 File WriterStatus.cpp, Line 325 Invalid write state D: Optiarc DVD RW AD-7200S18:49:46 #33 TRANSFER -18 File WriterStatus.cpp, Line 325 Could not perform EndTrack18:49:46 #34 Text 0 File MMC.cpp, Line 17135 <Optiarc DVD RW AD-7200S > start Close Track #218:49:46 #35 SPTI -1176 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 18:49:46 #36 CDR -1176 File WriterStatus.cpp, Line 375 Session fixation error D: Optiarc DVD RW AD-7200S18:49:46 #37 TRANSFER -19 File WriterStatus.cpp, Line 375 Could not perform Fixation18:49:46 #38 Text 0 File WriterStatus.cpp, Line 384 falling back to disc fixation18:49:46 #39 Text 0 File DVDPlusDualLayer.cpp, Line 1452 SetDriveCaps: Set LAST LBA of layer 1 to 018:49:46 #40 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 10x (1 500 Ko/s)18:49:46 #41 Text 0 File SCSIPTICommands.cpp, Line 267 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME18:49:50 #42 Text 0 File Cdrdrv.cpp, Line 11478 DriveLocker: UnLockVolume completed18:49:50 #43 Text 0 File SCSIPTICommands.cpp, Line 430 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROLExisting drivers:Registry Keys:HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon Quote Link to comment Share on other sites More sharing options...
ChtiGG Posted July 20, 2009 Report Share Posted July 20, 2009 Salut,C'est très dérangeant pour un PC neuf Tu peux essayer la manip de Pat pour supprimer et réinstaller le graveur au niveau logiciel. Quote Link to comment Share on other sites More sharing options...
crazymonkey Posted July 21, 2009 Report Share Posted July 21, 2009 j'ai le même graveur que toi mais un bios moins recenthttp://www.ma-config.com/AfficherResume-84547-0.htmlMoi j'ai installer mon vista a partir du lecteur nickelje fais les mise a jour sp2et là mon graveur n'est plus reconnu, pas bienmise a jour du chipset est nickel tous et reconnu est marche nickelDonc regarde si ton chipset est a jour et essaie avec un autre utilitaire de gravure. Quote Link to comment Share on other sites More sharing options...
Raymond 78 Posted July 23, 2009 Report Share Posted July 23, 2009 Bonjour,J'ai aussi rencontré ce problème après avoir changé le boitier sur un PC de six mois. J'ai recherché un logiciel de gravure après avoir essayé une dizaine j'ai opté pour Free Easy Burner qui est gratuit facile et en français.Si cela peut aider Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.